Firearm & Gun Forum -

Firearm & Gun Forum - (
-   Semi-Auto Handguns (
-   -   amt automag ii (

topsho7 10-11-2011 04:13 AM

amt automag ii
Does anyone have an amt automag ii ? How do you get it to stop jamming?

danf_fl 10-11-2011 07:01 AM

First off, welcome to the forum. Stop by the "Introductions" area and tell us a little about yourself.

Most jams are caused by the magazines. Have you tried a new mag? And please explaing what kind of jam you are getting. Is it a Failure to Feed? Failure to Fire? Failure to Eject? Failure to Load? Trying to load a second round?

topsho7 10-12-2011 02:09 AM

Well it stovepipes and sometimes a round gets stuck trying to feed up the ramp. I noticed it shoots better with just 5 rounds in the mag.

topsho7 10-12-2011 02:14 AM

Ohh and I just have the one mag. I had another question, there are no markings on the slide and the frame just the serial# I know there were 3 locations these guns were made, and it doesn't seem to be polished off either, thanks for the help

danf_fl 10-12-2011 10:27 AM

The first thing is to get another mag. It sounds like the mag is releasing the rounds at the wrong time in the cycling of the slide.

WDB 10-15-2011 12:47 AM

I have one. First give it a deeep cleaning (these pistols do not like to be dirty). If that doesn't fix your issue.try. Polishing the feed ramp, it will make a world of difference. I used a drumel tool with a cotton wheel and a light abrasive paste. Also clean the ramp after each use as it ghalls up easily. Also check your guide rod spring. Mine broke awhile back causing it to jam evey 4-5 rounds. I replace it and it runs fine now. It also depends on the ammo you feed it, buy the good stuff and FMJ rounds are best.

They are a fun pistol to shot but have to be kept in top shape if you want a hassle free time at the range.

All times are GMT. The time now is 04:46 AM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.