Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   New York Gun Forum (http://www.firearmstalk.com/forums/f145/)
-   -   microstamping again (http://www.firearmstalk.com/forums/f145/microstamping-again-71371/)

mountainman13 08-29-2012 04:17 PM

microstamping again
 
http://www.foxnews.com/politics/2012/08/28/microstamping-legislation-may-lead-remington-colt-to-relocate/

jjfuller1 08-29-2012 05:01 PM

just horrible... kicking myself for buying a house in NYS now.. harder to move.. lol

mountainman13 08-29-2012 05:05 PM

Aim for nh. Then you'll be free and we can hang out. Lol

c3shooter 08-29-2012 05:39 PM

1 Attachment(s)
Genius! Sheer genius, I tell you! Something like that would leave a permanent marking on a fired primer, which would allow you to determine that the fatal shots were fired from...... a gun stolen two years ago in a burglary.

Or sold in a Dept of Justice sanctioned straw man sale.

Something like that would leave a mark on every primer it struck! To remove that feature would take at least 10 seconds and a strip of wet-r-dry sandpaper! Genius, I tell you!



Attachment 56060

Vincine 08-29-2012 05:58 PM

I’m missing something.
Is the proposed state regulation to require all guns MADE in NY to have microstamping, or all guns SOLD in NY to have microstamping?
The former means guns NOT made in NY and without the microstamping would be okay to buy.
The latter means Remington could save themselves the tooling, and moving, expen$e by just not selling NY their guns.

Dillinger 08-29-2012 06:11 PM

All this does is just give anyone with a half a brain in their head the two perfect accessories to commit crime.

Step 1) Pull microstamped pin and replace with aftermarket

Step 2) Visit indoor range and collect like caliber brass

Step 3) Commit crime with handgun, drop microstamped shell casings at scene from indoor rane

Step 4) Replace original firing pin SHOULD a miracle happen and the police show up to want to test your handgun.

:rolleyes:

Really? Please tell me someone on the anti-gun side has more brains than that. That's like playing Chess against brain dead vegetable.... wait. I digress..... :o

mountainman13 08-29-2012 06:14 PM

Revolver? No case left behind?

Dillinger 08-29-2012 06:31 PM

Quote:

Originally Posted by mountainman13 (Post 920289)
Revolver? No case left behind?

Another good point. Pick one in a common caliber and then throw some shell casings on the ground. They won't know until they do a ballistics on the bullet for lands and grooves.

Fire off a six pack of fire forming rounds to alter the lands and grooves and they would be hard pressed to make a realistic match that would hold up in court.

bkt 08-29-2012 08:25 PM

This is also about raising the cost of firearms to try to reduce the number purchased. Making unique firing pins will raise costs significantly for the manufacturer and that cost will be passed on to the consumer.

Dillinger 08-29-2012 08:32 PM

Quote:

Originally Posted by bkt (Post 920411)
This is also about raising the cost of firearms to try to reduce the number purchased. Making unique firing pins will raise costs significantly for the manufacturer and that cost will be passed on to the consumer.

There's plenty of ways around that if you are not a mass producing super giant.

"Here I present to you the new JD 1911 almost fully functioning handgun*"


*firing pin not included, please click the link on the bottom of the page to go to our sister companies' website where one can be purchased to fit your model. This was not our idea but the liberal jackholes in your fair state of forced to do this ridiculous measure just to be able to sell you a gun at a price you can afford. :rolleyes:


All times are GMT. The time now is 10:45 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.