Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   General Handgun Discussion (http://www.firearmstalk.com/forums/f14/)
-   -   S&W I frame (http://www.firearmstalk.com/forums/f14/s-w-i-frame-50934/)

merlin12scuba 10-31-2011 06:24 PM

S&W I frame
 
Greetings:

I have a pre-WWII S&W I frame, five shot that I'm working on. I have it disassembled with the exception of the spring and screw that works the cylinder catch (Just in front of the trigger guard). I've tried soaking in PBBlaster and WD 40 but can't work it loose. Any suggestions before I drill it and have to increase the screw size?

Thanks.

c3shooter 10-31-2011 08:03 PM

Product called KROIL, made by Kano Labs. Penetrating oil on steroids. Dab on, let set 24 hours. Be sure you are turning screw the correct direction. There is also a spray version called Aero Kroil. Stuff is not cheap, but works like nothing else.

purehavoc 10-31-2011 09:46 PM

my buddy uses this stuff called deep creep , swear it puts PB blaster to shame on getting things apart that are rusted , frozen , or seized

merlin12scuba 11-01-2011 12:51 PM

Quote:

Originally Posted by c3shooter (Post 616076)
Product called KROIL, made by Kano Labs. Penetrating oil on steroids. Dab on, let set 24 hours. Be sure you are turning screw the correct direction. There is also a spray version called Aero Kroil. Stuff is not cheap, but works like nothing else.

Sounds great! I'll try that today. This revolver is in good shape otherwise and being so small will make a great pocket piece.

Thanks.

canebrake 11-01-2011 02:31 PM

Kroil, GOOD STUFF!

http://i1196.photobucket.com/albums/...1/KROIL1-1.jpg

http://i1196.photobucket.com/albums/...KROIL2-1-1.jpg


All times are GMT. The time now is 10:44 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.