Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   General Handgun Discussion (http://www.firearmstalk.com/forums/f14/)
-   -   Rebluing (http://www.firearmstalk.com/forums/f14/rebluing-29690/)

Hatchet8 07-26-2010 03:43 AM

Rebluing
 
I've heard several ways to go with rebluing, even throwing some guns away instead of wasting the time & buying new ones. Not a big fan of throwing firearms away, especially good, reliable ones, regardless of name brand...okay except for Davis & maybe Jennings(never shot a Jennings). Davis nearly cost my mom her life, I wouldn't turn one into the Police for a new pair of sneakers...P.O.S.. So, does anybody have suggestions on which way to go with a do it yourself kit for rebluing a pistol. The two that everybody harps on are Blue Wonder & Brownell's. My two biggest issues are not to break the bank & to have a fairly decent looking finish. Thanks everyone!

c3shooter 07-26-2010 05:34 AM

I have not seen a cold blue that will look as good and as even as a hot blue. Both Brownells and Blue Wonder are better than other cold blues- but still not as dark, even, or durable as a hot blue. The key is prep of the metal- polish it- and degrease it before bluing. Warm metal will blue much better. Rebluing a fiream tends to lower its resale value. If you are redo-ing a single shot 22- go for it. A nice S&W revolver- find a smith that does bluing.

DrumJunkie 07-26-2010 06:17 AM

Cold bluing is great for touch up work but if it's a whole weapon I'm wanting to refinish then I'd opt for a hot blue job every time.

There are other things you can use other than bluing that might not be as difficult to do. It all depends on what you really want. If it is to get them back to like new then there are tons of instructional vids to aid you in your quest.

I will agree with you that unless the weapon is total junk then it's worth fixing.

danf_fl 07-26-2010 08:17 AM

There are other alternatives. Some like GunKote (a spray-on, oven cure paint). There is nickel plating. Parkerizing is not that expensive and can be done on the grill (there are even youtube videos showing how).

Or, as I did with one, go to Wally World and pick up a can of Krylon. Touch ups can done later if needed, and curing is just letting the thing dry for a couple of weeks.

Good Luck

DrumJunkie 07-26-2010 08:44 AM

I've seen a couple DuraCoat jobs that looked really good. I'n thinking about doing my Para LTC with it if I ever figure what I want it to look like when it's finished :o

danf_fl 07-26-2010 08:53 AM

I did one and posted a picture (but I screwed up and tried to fix a "run" while still wet). I went with a desert tan on frame and flat black on slide and other parts. Look in the DIY where I posted "A couple I am working on"


All times are GMT. The time now is 10:01 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.