Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Idaho Gun Forum (http://www.firearmstalk.com/forums/f125/)
-   -   Ruger Mark II .22 (http://www.firearmstalk.com/forums/f125/ruger-mark-ii-22-a-65318/)

Romad54 05-28-2012 06:46 PM

Ruger Mark II .22
 
My wife has a Mark II Ruger .22 semi auto. We shot it this weekend while camping, so I took it apart (following manual directions) and when attempting to reassemble it the bolt is locked! It wont pull back fully. I was thinking maybe I charged it somehow, or the safety was partially on so took it apart again, and now the locking pin will not seat fully. :confused:
Any help would be greatly appreciated!

winds-of-change 05-28-2012 08:04 PM

Been there, done that. :o

I hope these links will help. You have to tilt the gun and pull the trigger at certain points to get the hammer in the proper position. You are sooo close. :)


http://www.1bad69.com/ruger/internals.htm

http://www.firearmstalk.com/forums/f33/yes-i-am-now-one-those-45994/

hiwall 05-28-2012 08:43 PM

There is a bunch of how-to videos on u-tube that can help you

elmerfudge 05-28-2012 09:07 PM

We've all done it. Just wait until you take apart the trigger, sear assembly.

Romad54 05-29-2012 02:52 PM

Thank you all!! Watching the videos helped, and I figured out my mistake was SO obvious and stupid!! At least now I know, and wont make the same mistake!!! Again, thanks!!!


All times are GMT. The time now is 08:05 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.