Originally Posted by HM2Grunt
JG has it for 14 rounds for $4. What kind of primer do they use. I would probably reload if I found the dies.
I use Lee dies (7.62 Nagant) for mine. Take 32-20 brass (I like starline, because the rims aren't too thick. If the rims are too thick, they will not work right) and run them through the dies. You may have to trim them some if they are too long after being reformed. The casings use small pistol primers.
You can find videos and articles on reloading for 7.62 Nagant all over the net. The gun will not have the gas seal if you reload, but it only causes a small drop in velocity.
I generally use lead bullets, which are fine, but can eventually cause the gun to jam up. Just take the cylinder out ever 50-100 rounds or so, and give the parts a wipe down. Mine has yet to jam.
Here's an article I wrote awhile back over them. It has a lot of good info in it.